Views: 25 Author: Site Editor Publish Time: 2016-04-20 Origin: Site
Home energy storage, I believe you are familiar with, what? You say you don't know what home energy storage is? You must have missed the last article! Now give you a chance to fix it, Click it→ Why you still know nothing about Home Battery？and you're welcome, buddy.
So how do you install a home energy storage system? Before we get to that, let's talk about what it usually takes to install a home energy storage system.
First of all, we need to have a photovoltaic system/wind system/hydroelectric power system, which is the entrance for us to absorb energy from nature, reasonable use of the earth's energy is a great help to protect the environment.
We also need a bi-directional inverter, but what is a bi-directional inverter? A bi-directional inverter is a converter that can convert direct current into fixed frequency and voltage or frequency and voltage regulated alternating current, or reverse alternating current into direct current. After the energy is absorbed, it needs to be converted into usable electricity, otherwise it cannot be used.
Most importantly, we need a storage battery, which is, as the name suggests, a battery pack that stores the electricity that we convert. If you get a lot of power and there's nowhere to store it, it's wasted effort.
Finally, we'll need a distribution box, but you'll probably have one in your home unless you never use electricity. The function of the distribution box is to provide the electrical energy for each electrical line.
Generally speaking, we need a few of these "Big Guys" to install home energy storage systems. There are, of course, some additional components, which I'll leave out for the moment.
As for how to install, first determine where you want to install the system. Generally speaking, the installation of photovoltaic systems is the most recommended, because most places have sufficient sunlight, photovoltaic systems are the best efficiency. Photovoltaic system needs to buy solar panels, according to their own needs to choose the number and size of solar panels, it is necessary to pay attention to the photovoltaic power generation system design renderings before installation, must not be blindly installed. Carefully review the effect drawing, combined with the actual situation of the site, judge the feasibility and rationality of the engineering design, such as height, orientation, spacing, shielding, maintenance access, etc. As for the installation part, the wire part is confirmed with a multimeter (in fact, most of them will be directly marked on it), so as to follow up wiring. Of course, if you live in an area where the wind is very strong, then installing a wind system is also a good choice to ensure that you enjoy the weather. Or if you're in a place where there's plenty of water, like a waterfall behind you, installing a hydroelectric system is a good strategy.
The two-way converter needs to be installed between the photovoltaic system/wind system/hydroelectric power system and energy storage battery, and it is still wired in accordance with the positive and negative poles.
As for the energy storage battery, it is divided into two parts, docking two-way inverter and internal docking. Docking two-way inverter is the old way, positive and negative docking. You have to think about what you want, do you want the batteries in parallel or in series? How much capacity is needed? It's up to you. And don't forget to connect the bi-directional inverter to the distribution box!